Computer main machine,display board,keyboard,mouse and marking controller can be totally packed in the cabinet with dust-prood door.

computer ,main machine and keyboard can be put inside this marking table.

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

l

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Marking material: ABS ,PA,PVC,PES,Steel,Titanium,Copper,etc.

Applicable scope: Electronic components,auto parts,motorcycles parts,automative mirrors,tools,bearings,watches,glasses,name plate,jewellery accessories,foods,artwork ornaments,cosmetics,and medical equipments industries

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

Marking material: ABS ,PA,PVC,PES,Steel,Titanium,Copper,etc.

Applicable scope: Electronic components,auto parts,motorcycles parts,automative mirrors,tools,bearings,watches,glasses,name plate,jewellery accessories,foods,artwork ornaments,cosmetics,and medical equipments industries.

Item	NCJ/B-YAG-50W	NCJ/B-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	Flat:100mm*100mm,     dia.of circle: 10—300mm
Cooling system	Out-built water cooling system

Marking material: ABS ,PA,PVC,PES,Steel,Titanium,Copper,etc.

Applicable scope: Electronic components,auto parts,motorcycles parts,automative mirrors,tools,bearings,watches,glasses,name plate,jewellery accessories,foods,artwork ornaments,cosmetics,and medical equipments industries

Item	NCJ/A-YAG-50W	NCJ/A-YAG-100W
Max power	1.5KW	2KW
Working voltage	220V /50Hz
Laser power	50W	100W
Length of laser weave	1064nm
Repeat frequency of laser	200Hz—50kHz
Marking speed	≤7000m/s
Min line width	0.02mm
Min.character	0.3mm*0.3mm
Repeat precision	±0.002mm
Marking depth	0.01mm—0.3mm
Marking range	100mm*100mm
Cooling system	Out-built water cooling system
Duty	24 Hours

With 7 inch touch display screen ,users can use the controller normally by connecting the main machine and air compressor.

We also provide pneumatic marking machine for marking on conical surface.

The applicable scope as follows:

1Motor industry:marking manufacture serial number,manufacture date,name,brand,etc.on the body,framework,base plate,pillar,engine,connecting rod,cylinder piston,cylinder sleeve,etc

2.Mechanical industry:marking on mechanical part,machine tool,hardware products,steel tube,sleeve,collar,roller,pump valve,ring flange,fastener

3.Marking on apparatu,electromechanical instrument

4.Marking on plastic products

5.Marking number and manufacture serial number,etc. on aluminum,copper and stainless

6.Marking dial plate

Marking area: flat: 200mm*110mm dia.of circle: 5--200mm

Marking Surface: Flat, cylindrical and conical surfaces

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage:220V or 110 V

Size of the Workpiece: No restrictions to the size and height of the workpiece when marking on flat surface

Major Parts: main machine,cotroller,rotary fixture and marking softwrae

Function Introduction: 1.Small or big workpiece, flat, cylindrical or conical surface, steel or paper material can all be marked; 2.marking needle can be turned freely;3.marking process can be undergone either standing or lying;4.With the rotary fixture can mark on cylindrical surface,Marking on flat suface like label will change the flat fixture.

Application Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, electromechanical equipment, label(name plate), dial plate, etc.
 

Items	Marking Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/D-135-85	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/D-200-110	200*110	5-200mm
NCQ/D-250-200	250*200	5-200mm
NCQ/3D-135-85	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3D-200-110	200*110	5-260mm
NCQ/3D-250-200	250*200	5-200mm

our machine can mark on mechianical parts without fixture,The applicable scope  are like motor industry,mechanical industry,etc.,such as framework,base plate,pillar,engine ,connecting rod,cylinder piston,cylinder sleeve,hardware products,machine tools,ring flange,fastener,etc.

With customized fixture,our marking machine is used to mark on engine box.Semi-autonomous printing is realized by connecting the well designed flat label fixtures to computers,and easy to use as this is in line with the theories of human engineering  of other similar marking machines,if they have ,are not connected to .

our dot peen marking machine can mark on flat surface of workpiece,like gears,engine box,pressure regulators,mechanical parts,etc,and there is no need of the fixture.Put the pieces on the base of the machine ,marking on it directly.

pneumatic marking machine can mark brand ,graphs,serial numbers,logo,date,etc. on any metals ,steel ,copper ,aluminum ,stainless,iron,etc.

we adopt double chain lifts ,make the machine with more extensive application scope,and more accurare.

Four imported square straight channelsare used to improve the marking quality and speed up the printing (generally only two channels)

Marking area: flat: 200mm*110mm dia.of circle: 5--260mm

Marking Surface: Flat, cylindrical and conical surfaces

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage:220V or 110 V

Size of the Workpiece: No restrictions to the size and height of the workpiece when marking on flat surface

Major Parts: main machine,cotroller,rotary fixture and marking softwrae

Function Introduction: 1.Small or big workpiece, flat, cylindrical or conical surface, steel or paper material can all be marked; 2.marking needle can be turned freely;3.marking process can be undergone either standing or lying;4.With the rotary fixture can mark on cylindrical surface,Marking on flat suface like label will change the flat fixture.

Application Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, electromechanical equipment, label(name plate), dial plate, etc.
 

Items	Marking Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/D-135-85	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/D-200-110	200*110	5-200mm
NCQ/D-250-200	250*200	5-200mm
NCQ/3D-135-85	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3D-200-110	200*110	5-260mm
NCQ/3D-250-200	250*200	5-200mm

Marking area: flat: 250mm*200mm dia.of circle: 5--260mm

Marking Surface: Flat, cylindrical and conical surfaces

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage:220V or 110 V

Size of the Workpiece: No restrictions to the size and height of the workpiece when marking on flat surface

Major Parts: main machine,cotroller,rotary fixture and marking softwrae

Function Introduction: 1.Small or big workpiece, flat, cylindrical or conical surface, steel or paper material can all be marked; 2.marking needle can be turned freely;3.marking process can be undergone either standing or lying;4.With the rotary fixture can mark on cylindrical surface,Marking on flat suface like label will change the flat fixture.

Application Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, electromechanical equipment, label(name plate), dial plate, etc.
 

Items	Marking Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/D-135-85	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/D-200-110	200*110	5-200mm
NCQ/D-250-200	250*200	5-200mm
NCQ/3D-135-85	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3D-200-110	200*110	5-260mm
NCQ/3D-250-200	250*200	5-200mm

Our pneumatic marking machine are used to mark on any metals,either flat or cylindrical surface.The exhausting device is an innovative design of our factory,which can reduce the nosies and improve the amenity of the operators.

with differernt rotary fixture ,can mark different type of dial .

Technical parmeters of our pneumatic marking machine as follows:

marking contents:numbers,Chinese and English characters,graphs

Size of characters:adjustable

Marking depth:0.02--1mm,(adjustable,relevant to the material)

Marking speed:100--2500mm/min

Marking materials:metals or nonmetals with hardness under HRC55

Marking surface:flat ,cylindrical or conical

Power source:AC220V±10%  50--60Hz

Pneumatic pressure:0.3--0.7MPa

Atmosphere Consumption: 25--40L/min

Engery Consumption: ≤100W

Marking area: 200mm*110mm

Marking surface:Flat surface or curved surface with flatness not exceeding 3mm

Marking speed:100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, electromechanical equipment, plastic product, label(nameplate), etc.

Major Parts:Main machine, pneumatic marking controller, pneumatic marking driver (software optical disk)
 

Function Introduction:Labels can be marked semiautomatically with the label fixture (optional); mechanical part can be marked without the label fixture (some require simple fixtures that fit to the parts)
 

Model	Mark Area(mm2)	Maximum Height(nm)	Weight (Kg)	Instruction
NCQ/1A-135-85	135*85	290	35	IA model means every single channel in X and Y direction, the others model are two channeled.
NCQ/A-90-60	90*60	260	35	Used for printings and characters marked on bullion jewelry, gifts and crafts
NCQ/A-135-85	135*85	290	35	Each two channels in X and Y direction, with better precision.
NCQ/A-200-110	200*110	290	40	Two -channeled
NCQ/A-250-200	250*200	290	60	Two -channeled
NCQ/Ad3-135-85	135*85	290	40	The head of the machine can be directed, which is applied for marking on curved surface (like wheel)
NCQ/3A-135-85	135*85	290	36	Two -channeled
NCQ/3A-135-85	135*85	290	40	The head of the machine can be lifted by motor, (the other model by hand)
Remarks: Many types are not listed; we will make it machines according to your requirements.

 Marking area: 500mm*320mm

Marking Surface: Surface or curved surface with flatness not exceeding 3mm

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable ,relevant to the material)

Voltage: 220V or 110V

Application Scope: Marking date, serial number, data, etc on big labels on transformer, machine tool, injection moulding machine, also on mechanical part, machine tool, pump valve, electromechanical equipment, etc

Major Parts: main machine ,controller ,simple fixture and marking software
 

Items	Marking Area(mm2)	Maximum Height(mm)	Weight(Kg)
NCQ/E-250-200	250*200	300	100
NCQ/E-320-270	320*270	300	115
NCQ/E-400-270	400*270	320	140
NCQ/E-500-320	500*320	320	155

 Marking area: 400mm*270mm

Marking Surface: Surface or curved surface with flatness not exceeding 3mm

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable ,relevant to the material)

Voltage: 220V or 110V

Application Scope: Marking date, serial number, data, etc on big labels on transformer, machine tool, injection moulding machine, also on mechanical part, machine tool, pump valve, electromechanical equipment, etc

Major Parts: main machine ,controller ,simple fixture and marking software
 

Items	Marking Area(mm2)	Maximum Height(mm)	Weight(Kg)
NCQ/E-250-200	250*200	300	100
NCQ/E-320-270	320*270	300	115
NCQ/E-400-270	400*270	320	140
NCQ/E-500-320	500*320	320	155

with different size of needle can mark the different size of characters,make more precision marking result,

Marking area:250mm*200mm

Marking surface:Flat surface or curved surface with flatness not exceeding 3mm

Marking speed:100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, electromechanical equipment, plastic product, label(nameplate), etc.

Major Parts:Main machine, pneumatic marking controller, pneumatic marking driver (software optical disk)
 

Function Introduction:Labels can be marked semiautomatically with the label fixture (optional); mechanical part can be marked without the label fixture (some require simple fixtures that fit to the parts)
 

Model	Mark Area(mm2)	Maximum Height(nm)	Weight (Kg)	Instruction
NCQ/1A-135-85	135*85	290	35	IA model means every single channel in X and Y direction, the others model are two channeled.
NCQ/A-90-60	90*60	260	35	Used for printings and characters marked on bullion jewelry, gifts and crafts
NCQ/A-135-85	135*85	290	35	Each two channels in X and Y direction, with better precision.
NCQ/A-200-110	200*110	290	40	Two -channeled
NCQ/A-250-200	250*200	290	60	Two -channeled
NCQ/Ad3-135-85	135*85	290	40	The head of the machine can be directed, which is applied for marking on curved surface (like wheel)
NCQ/3A-135-85	135*85	290	36	Two -channeled
NCQ/3A-135-85	135*85	290	40	The head of the machine can be lifted by motor, (the other model by hand)
Remarks: Many types are not listed; we will make it machines according to your requirements.

Marking area: flat: 135mm*85mm dia.of circle: 5--200mm

Marking Surface:Flat or cylindrical surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, plastic product, electromechanical equipment, label (nameplate), etc.

Major Parts:Main machine, controller, rotary fixture and marking softwre

Function Introduction:Label can be marked on cylinder material (such as steel tube, ring flange) with circumferential marking fixture; mechanical part can be marked without the label fixture
 

 

Items	Marking  Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/B-135	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/B-200	200*110	5-200mm
NCQ/B-250	250*200	5-200mm
NCQ/3B-135	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3B-200	200*110	5-260mm
NCQ/3B-250	250*200	5-260mm

Marking area: flat: 135mm*85mm dia.of circle: 5--200mm

Marking Surface: Flat, cylindrical and conical surfaces

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage:220V or 110 V

Size of the Workpiece: No restrictions to the size and height of the workpiece when marking on flat surface

Major Parts: main machine,cotroller,rotary fixture and marking softwrae

Function Introduction: 1.Small or big workpiece, flat, cylindrical or conical surface, steel or paper material can all be marked; 2.marking needle can be turned freely;3.marking process can be undergone either standing or lying;4.With the rotary fixture can mark on cylindrical surface,Marking on flat suface like label will change the flat fixture.

Application Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, electromechanical equipment, label(name plate), dial plate, etc.
 

Items	Marking Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/D-135-85	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/D-200-110	200*110	5-200mm
NCQ/D-250-200	250*200	5-200mm
NCQ/3D-135-85	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3D-200-110	200*110	5-260mm
NCQ/3D-250-200	250*200	5-200mm

 Marking area: flat: 135mm*85mm dia.of circle: 5--260mm

Marking Surface:Flat or cylindrical surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, plastic product, electromechanical equipment, label (nameplate), etc.

Major Parts:Main machine, controller, rotary fixture and marking softwre

Function Introduction:Label can be marked on cylinder material (such as steel tube, ring flange) with circumferential marking fixture; mechanical part can be marked without the label fixture
 

Items	Marking  Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/B-135	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/B-200	200*110	5-200mm
NCQ/B-250	250*200	5-200mm
NCQ/3B-135	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3B-200	200*110	5-260mm
NCQ/3B-250	250*200	5-260mm

Marking area: flat: 200mm*110mm dia.of circle: 5--260mm

Marking Surface:Flat or cylindrical surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, plastic product, electromechanical equipment, label (nameplate), etc.

Major Parts:Main machine, controller, rotary fixture and marking softwre

Function Introduction:Label can be marked on cylinder material (such as steel tube, ring flange) with circumferential marking fixture; mechanical part can be marked without the label fixture
 

 

Items	Marking  Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/B-135	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/B-200	200*110	5-200mm
NCQ/B-250	250*200	5-200mm
NCQ/3B-135	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3B-200	200*110	5-260mm
NCQ/3B-250	250*200	5-260mm

Marking area: 100mm*20mm

Marking surface: flat surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope: Motor Industry: Marking serial number, manufacture date, name, brand, etc. on the body, framework, base plate, pillar, engine, and other big and heavy material.

Major Parts: Main machine,pneumatic marking controller, pneumatic marking driver(software optical disk)

Function Introduction:It is our smallest marking machine,light weight ,small volume and easy to move.The main machine can work through long cable wire far away from computer and controller,and directly mark on the body,base plate,pillar,engine.

Items	Marking area (mm2)	Weight(kg)
		W/O electromagnet	With electromagnet
NCQ/C-80-25	80*25	3.5	4.3
NCQ/C-100-20	100*20	4.8	5.6
NCQ/C-100-40	100*40	5	5.8
NCQ/C-150-40	150*40	6	6.8
NCQ/C-135-85	135*85	10.5	12
NCQ/C-160-85	160*85	12	13.5
Remarks:  we can make machines according to your requirements

Marking area: 135mm*85mm

Marking surface: flat surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope: Motor Industry: Marking serial number, manufacture date, name, brand, etc. on the body, framework, base plate, pillar, engine, and other big and heavy material.

Major Parts: Main machine,pneumatic marking controller, pneumatic marking driver(software optical disk)

Function Introduction: Main machine can work through long cable wire far away from computer and control machine, and directly mark on the body, base plate, pillar, engine,specially for mould

Items	Marking area (mm2)	Weight(kg)
		W/O electromagnet	With electromagnet
NCQ/C-80-25	80*25	3.5	4.3
NCQ/C-100-20	100*20	4.8	5.6
NCQ/C-100-40	100*40	5	5.8
NCQ/C-150-40	150*40	6	6.8
NCQ/C-135-85	135*85	10.5	12
NCQ/C-160-85	160*85	12	13.5
Remarks:  we can make machines according to your requirements

Marking area: 135mm*85mm

Marking surface: flat surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope: Motor Industry: Marking serial number, manufacture date, name, brand, etc. on the body, framework, base plate, pillar, engine, and other big and heavy material.

Major Parts: Main machine,pneumatic marking controller, pneumatic marking driver(software optical disk)

Function Introduction: Main machine can work through long cable wire far away from computer and control machine, and directly mark on the body, base plate, pillar, engine,specially for ball valve.

 

Items	Marking area (mm2)	Weight(kg)
		W/O electromagnet	With electromagnet
NCQ/C-80-25	80*25	3.5	4.3
NCQ/C-100-20	100*20	4.8	5.6
NCQ/C-100-40	100*40	5	5.8
NCQ/C-150-40	150*40	6	6.8
NCQ/C-135-85	135*85	10.5	12
NCQ/C-160-85	160*85	12	13.5
Remarks:  we can make machines according to your requirements

Marking area: flat: 250mm*200mm dia.of circle: 5--200mm

Marking Surface:Flat or cylindrical surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, plastic product, electromechanical equipment, label (nameplate), etc.

Major Parts:Main machine, controller, rotary fixture and marking softwre

Function Introduction:Label can be marked on cylinder material (such as steel tube, ring flange) with circumferential marking fixture; mechanical part can be marked without the label fixture
 

 

Items	Marking  Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/B-135	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/B-200	200*110	5-200mm
NCQ/B-250	250*200	5-200mm
NCQ/3B-135	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3B-200	200*110	5-260mm
NCQ/3B-250	250*200	5-260mm

Marking area: 135mm*85mm

Marking surface:Flat surface or curved surface with flatness not exceeding 3mm

Marking speed:100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, electromechanical equipment, plastic product, label(nameplate), etc.

Major Parts:Main machine, pneumatic marking controller, pneumatic marking driver (software optical disk)
 

Function Introduction:Labels can be marked semiautomatically with the label fixture (optional); mechanical part can be marked without the label fixture (some require simple fixtures that fit to the parts)
 

 Marking area: flat: 135mm*85mm dia.of circle: 5--260mm

Marking Surface: Flat, cylindrical and conical surfaces

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage:220V or 110 V

Size of the Workpiece: No restrictions to the size and height of the workpiece when marking on flat surface

Major Parts: main machine,cotroller,rotary fixture and marking softwrae

Function Introduction: 1.Small or big workpiece, flat, cylindrical or conical surface, steel or paper material can all be marked; 2.marking needle can be turned freely;3.marking process can be undergone either standing or lying;4.With the rotary fixture can mark on cylindrical surface,Marking on flat suface like label will change the flat fixture.

Application Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, electromechanical equipment, label(name plate), dial plate, etc.
 

Items	Marking Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/D-135-85	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/D-200-110	200*110	5-200mm
NCQ/D-250-200	250*200	5-200mm
NCQ/3D-135-85	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3D-200-110	200*110	5-260mm
NCQ/3D-250-200	250*200	5-200mm

Marking area: flat: 250mm*200mm dia.of circle: 5--260mm

Marking Surface:Flat or cylindrical surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, plastic product, electromechanical equipment, label (nameplate), etc.

Major Parts:Main machine, controller, rotary fixture and marking softwre

Function Introduction:Label can be marked on cylinder material (such as steel tube, ring flange) with circumferential marking fixture; mechanical part can be marked without the label fixture
 

 

Items	Marking  Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/B-135	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/B-200	200*110	5-200mm
NCQ/B-250	250*200	5-200mm
NCQ/3B-135	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3B-200	200*110	5-260mm
NCQ/3B-250	250*200	5-260mm

Marking area: flat: 200mm*110mm dia.of circle: 5--200mm

Marking Surface:Flat or cylindrical surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, plastic product, electromechanical equipment, label (nameplate), etc.

Major Parts:Main machine, controller, rotary fixture and marking softwre

Function Introduction:Label can be marked on cylinder material (such as steel tube, ring flange) with circumferential marking fixture; mechanical part can be marked without the label fixture
 

 

Items	Marking  Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/B-135	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/B-200	200*110	5-200mm
NCQ/B-250	250*200	5-200mm
NCQ/3B-135	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3B-200	200*110	5-260mm
NCQ/3B-250	250*200	5-260mm

Marking area: 135mm*85mm

Marking surface: flat surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope: Motor Industry: Marking serial number, manufacture date, name, brand, etc. on the body, framework, base plate, pillar, engine, and other big and heavy material.

Major Parts: Main machine,pneumatic marking controller, pneumatic marking driver(software optical disk)

Function Introduction:

With electromagnet ,be used to mark on base plate,pillar of the car.Main machine can work through long cable wire far away from computer and controller,and directly mark on the body,base plate,pillar,engine.

 

Items	Marking area (mm2)	Weight(kg)
		W/O electromagnet	With electromagnet
NCQ/C-80-25	80*25	3.5	4.3
NCQ/C-100-20	100*20	4.8	5.6
NCQ/C-100-40	100*40	5	5.8
NCQ/C-150-40	150*40	6	6.8
NCQ/C-135-85	135*85	10.5	12
NCQ/C-160-85	160*85	12	13.5
Remarks:  we can make machines according to your requirements

Marking area: 150mm*40mm

Marking surface: flat surface

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable,relevant to the material)

Voltage: 220V or 110V

Applicable Scope: Motor Industry: Marking serial number, manufacture date, name, brand, etc. on the body, framework, base plate, pillar, engine, and other big and heavy material.

Major Parts: Main machine,pneumatic marking controller, pneumatic marking driver(software optical disk)

Function Introduction: Main machine can work through long cable wire far away from computer and control machine, and directly mark on the body, base plate, pillar, engine.

Items	Marking area (mm2)	Weight(kg)
		W/O electromagnet	With electromagnet
NCQ/C-80-25	80*25	3.5	4.3
NCQ/C-100-20	100*20	4.8	5.6
NCQ/C-100-40	100*40	5	5.8
NCQ/C-150-40	150*40	6	6.8
NCQ/C-135-85	135*85	10.5	12
NCQ/C-160-85	160*85	12	13.5
Remarks:  we can make machines according to your requirements

 

With rotary marking fixture,marking on the cylindrical surface.We adopt double chain  lifts,make sure the machine marking steadily.

Marking number and manufacture serial number etc. on aluminum ,copper and stainless steel label. Machine can be customized according to your particular requirements

Marking area: flat: 250mm*200mm dia.of circle: 5--200mm

Marking Surface: Flat, cylindrical and conical surfaces

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm (adjustable,relevant to the material)

Voltage:220V or 110 V

Size of the Workpiece: No restrictions to the size and height of the workpiece when marking on flat surface

Major Parts: main machine,cotroller,rotary fixture and marking softwrae

Function Introduction: 1.Small or big workpiece, flat, cylindrical or conical surface, steel or paper material can all be marked; 2.marking needle can be turned freely;3.marking process can be undergone either standing or lying;4.With the rotary fixture can mark on cylindrical surface,Marking on flat suface like label will change the flat fixture.

Application Scope:Motor part, mechanical part, machine tool, hardware product, pump valve, steel tube, ring flange, electromechanical equipment, label(name plate), dial plate, etc.
 

Items	Marking Area		Instruction
	Flat(mm2)	Diameter of circle
NCQ/D-135-85	135*85	5-200mm	Two-axis rotary working,weight of workpieces under 10kgs
NCQ/D-200-110	200*110	5-200mm
NCQ/D-250-200	250*200	5-200mm
NCQ/3D-135-85	135*85	5-260mm	Three-axis rotary working,weight of workpieces under 20kgs
NCQ/3D-200-110	200*110	5-260mm
NCQ/3D-250-200	250*200	5-200mm

Labels or nameplates can be marked by Flat marking machine semiautomatically, with a label fixture, and can mark numbers, manufacturing serial numbers, etc. on aluminum. copper and stainless steel.
 

 Marking area: 320mm*270mm

Marking Surface: Surface or curved surface with flatness not exceeding 3mm

Marking speed: 100--2500mm/min

Marking depth: 0.02--1mm(adjustable ,relevant to the material)

Voltage: 220V or 110V

Application Scope: Marking date, serial number, data, etc on big labels on transformer, machine tool, injection moulding machine, also on mechanical part, machine tool, pump valve, electromechanical equipment, etc

Major Parts: main machine ,controller ,simple fixture and marking software
 

Items	Marking Area(mm2)	Maximum Height(mm)	Weight(Kg)
NCQ/E-250-200	250*200	300	100
NCQ/E-320-270	320*270	300	115
NCQ/E-400-270	400*270	320	140
NCQ/E-500-320	500*320	320	155